Shoretec ShoreFlex® | Vegetated Concrete Block Erosion Control Mat

Concrete Protection.
A Vegetated Finish.

Protecting a drainage corridor does not have to mean covering it with loose rock or a continuous concrete surface. R.H. Moore helps Florida project teams evaluate ShoreFlex rolled concrete block mats, backing options and the details needed for a project-specific solution.

Start With the Site Challenge

Combine Concrete Armor With Vegetation

ShoreFlex is a rolled erosion-control system combining concrete blocks, a high-strength geogrid and an erosion-control blanket or turf reinforcement mat backing. Spaces between the blocks allow a vegetated finish where site conditions and establishment practices support it.

Engineers & Specifiers

Evaluate the complete assembly, including backing, anchorage and perimeter details, against the hydraulic and ground conditions.

Contractors & Estimators

Review roll selection, delivery, lifting and installation access before developing the project estimate.

Owners & Municipalities

Consider appearance, inspection access and vegetation management alongside the required erosion protection.

Where to Evaluate ShoreFlex

Protection Across Drainage & Shoreline Applications

The manufacturer identifies channel beds and side slopes, pipe and culvert inlets or outlets, shorelines, roadside drainage and letdowns as applications. Confirm suitability for the proposed exposure and layout.

Channels & Ditches

Show flow direction, channel geometry and protected limits. Coordinate the lining with adjacent drainage structures.

Inlets & Outlets

Identify the transition from concentrated flow into the receiving area. Include elevations and any available hydraulic analysis.

Slopes & Shorelines

Provide the slope profile, ground conditions and anticipated water levels. Resolve the relationship between the armor and surrounding ground.

Understand the Assembly

Select More Than the Surface Block

The concrete blocks are integrated with geogrid and backing to form a flexible mat supplied in rolls. Standard and custom mat sizes are described by the manufacturer; confirm the available configuration for your project.

Concrete & Geogrid

Request the current product properties for the proposed mat. Make sure submittals, quoted materials and drawings describe the same assembly.

Backing Layer

Choose backing for the soil, establishment plan and required service conditions. Review its role in seed and soil retention.

Roll Configuration

Coordinate dimensions and installation layout with handling access, field geometry and the approved connection details.

Match the Backing to the Site

Different Establishment & Reinforcement Needs

The manufacturer lists single-net straw, double-net straw, straw/coconut, coconut, turf reinforcement mat and high-performance turf reinforcement mat backing options. These provide choices for site-specific soil and seed retention and different service durations.

Natural-Fiber Options

Review the proposed vegetation establishment period and expected exposure when considering straw, coconut or blended backings.

Reinforcement Mat Options

Evaluate TRM and HPTRM backings against the project requirements. Request assembly-specific data for the selected option.

Confirm the Specification

Identify the backing in the drawings, submittals and quote. Resolve substitutions before procurement rather than treating every backing as equivalent.

Review Manufacturer Backing Options →

Before You Specify

Coordinate Hydraulics, Ground & Edges

Hydraulic Design Basis

Provide flow information, water levels and relevant exposure conditions. Have the engineer establish acceptance criteria for the proposed assembly.

Foundation & Filtration

Define subgrade preparation and any required filter or bedding components for the actual soil and hydraulic conditions.

Anchorage & Terminations

Show upstream and downstream limits, sides, toes and connections to structures. Use the applicable manufacturer details as a starting point for project review.

Vegetation Plan

Coordinate soil preparation, seed or planting, establishment care and the final maintenance approach with the selected backing.

Plan for Construction

Build the Roll Layout Into the Estimate

01 / Confirm the Layout

Measure the protected surface, identify roll orientation and coordinate joints, overlaps and boundaries using current approved instructions.

02 / Check Handling Access

Confirm actual roll weights, lifting equipment, staging and the route to the work area. Verify equipment capacity for the selected configuration.

03 / Coordinate Site Preparation

Establish grading, water-control needs and the sequence for any soil preparation, seeding and mat placement.

04 / Inspect & Establish

Document placement and terminations, complete the required acceptance checks and follow the approved vegetation establishment plan.

Manufacturer Project Examples

Review Similar Applications

ShoreFlex’s case-study library lists roadside channeling, drainage ditch lining, channel reinforcement, dam overtopping and outfall protection examples. Use them to identify relevant questions for your project review.

Browse Manufacturer Case Studies →

These are manufacturer references. They are not presented as RHM-supplied installations or proof of performance under your site conditions.

Plan for Long-Term Service

Maintain the Vegetation & Inspect the Armor

The manufacturer describes a surface that can be mowed. Confirm the appropriate equipment, access and operating conditions for the installed project with the responsible team.

Vegetation Care

Follow the approved establishment and maintenance plan. Address bare areas and changes in vegetative cover.

Surface & Edges

Inspect for mat movement, damaged components, exposed underlying material and soil loss around terminations.

After Flow Events

Set project-specific inspection triggers and record debris, erosion or other changes that may require corrective work.

Before You Order

ShoreFlex FAQs

How is ShoreFlex different from individual armor units?

ShoreFlex integrates concrete blocks, geogrid and backing into a rolled mat. Compare the complete assembly and installation method with other options against the site requirements.

Which backing should I specify?

Select backing using the soil, establishment needs, service conditions and required technical evidence. Ask RHM to coordinate current manufacturer data for review.

Can I select the system from a velocity value alone?

Selection requires the actual hydraulic conditions, proposed assembly and supporting performance information. Have the project engineer review the full design basis.

Are custom sizes available?

The manufacturer describes standard and custom sizes. Confirm current availability, quantities, handling requirements and lead time through RHM.

Can it be mowed?

The manufacturer describes mowability. Confirm the project’s vegetation management method and equipment suitability before operating on the installed surface.

What should I send for pricing?

Provide the Florida project location, plans or protected dimensions, specified backing, hydraulic information, access conditions and delivery schedule.

Technical Resources

Get the Details for Your Review

Available drawing categories include channels, slopes, detention ponds, outlets and shorelines. Ask RHM to coordinate the current details and data needed for the selected application.

Bring Us the Drainage Challenge

Discuss ShoreFlex With R.H. Moore

Share your plans, protection limits and construction constraints. RHM can help organize the product review, coordinate manufacturer resources and develop pricing for the selected scope.