Geotextiles | Separation, Filtration & Stabilization

The Right Fabric.
The Right Foundation.

Soft ground, migrating soil and clogged drainage can compromise a project long after construction. R.H. Moore helps Florida project teams select geotextiles that fit the soil, water movement and loads the site must handle.

Start With the Challenge

What Does Your Geotextile Need to Do?

A geotextile is an engineered fabric installed within a soil or pavement system. Start with the job it needs to perform, then match its strength, opening size and water-flow properties to the application.

Keep Materials Separate

Help prevent subgrade soil and aggregate from mixing beneath roads, parking areas and construction access routes. Preserve the intended aggregate layer and support the pavement or working platform above.

Filter Soil, Keep Water Moving

Retain soil while allowing water to pass into drains or through a filter layer beneath riprap and other protection systems. Match filtration properties to the soil and expected hydraulic conditions.

Stabilize or Protect the System

Use appropriately engineered fabrics for reinforcement over weak ground or cushioning around sensitive components. Stabilization and protection require different properties; select for the intended function.

Support for Your Role

Where Are You in the Project?

Engineers & Specifiers

Need to establish performance criteria or review a proposed material? Bring the geotechnical report, plans and specifications. RHM can support comparisons of mechanical and hydraulic properties and help assemble technical documentation.

Contractors & Estimators

Need to price the work, plan installation or coordinate deliveries? Share the installation area, specified requirements, roll-width constraints, project location and schedule so the material discussion fits the work ahead.

Owners & Project Managers

Need to understand the recommendation or address recurring pavement and drainage concerns? RHM can help connect the site challenge to the material function and coordinate the next technical conversation.

Choose the Approach

Woven, Nonwoven or a Specialized Fabric?

Woven Geotextiles

Interlaced yarns create fabrics used for separation, stabilization and reinforcement. Some woven constructions are designed specifically for filtration. Yarn structure and tested properties matter more than the category name alone.

Nonwoven Geotextiles

Bonded fibers create fabrics commonly used for filtration, separation and cushioning. Select opening size, water-flow capacity, puncture resistance and survivability for the soil and installation conditions.

Specialized Geotextiles

Some applications require enhanced moisture management, high-strength reinforcement or a pavement interlayer. These functions need application-specific evaluation rather than substitution based on fabric weight.

Woven does not automatically mean impermeable, and nonwoven does not automatically mean suitable for every drain. Fabric weight alone is not a complete specification.

Specify for Performance.
Plan for Installation.

Two fabrics that look similar can behave differently in the ground. Soil gradation, groundwater, loading and construction methods all affect material selection.

RHM can help evaluate the options against project requirements and coordinate supporting manufacturer information for review by the engineer of record.

Key Selection Considerations

Required function and design life
Soil gradation and subgrade strength
Flow direction and hydraulic conditions
Opening size and soil-retention compatibility
Tensile properties and allowable deformation
Puncture resistance and installation survivability
Aggregate type, placement and cover thickness
Applicable specifications and agency requirements
Established Brands. Practical Guidance.

Brand Familiarity Is a Starting Point

MIRAFI® by Solmax

RHM supports geotextile applications with MIRAFI, a Solmax brand with woven, nonwoven and specialized fabric options for civil and environmental projects.

Older drawings and specifications may reference TenCate or TenCate Mirafi. Share the original requirement with RHM so the current documentation and proposed material can be reviewed together.

Start with the required function and specification, then evaluate the appropriate fabric. Contact RHM to discuss brand requirements, acceptable alternatives and current availability for your project.

See the Application in Practice

A Working Platform Over Soft Coastal Soils

Manufacturer Case Study | Moncks Corner, South Carolina

Keeping a Parking Expansion Moving

A facility expansion required parking construction over soft, moisture-sensitive ground near a floodplain. Solmax documents the use of a woven geotextile beneath aggregate to provide stabilization, separation and filtration.

The practical takeaway: Evaluate the fabric as part of the complete ground-support system, including soil conditions, aggregate placement and construction loading.

Read the Manufacturer Case Study →

Published by Solmax. This is a manufacturer application example; RHM participation is not claimed.

From Plans to Placement

A Clear Path to Material Selection

01 / Share the Site

Send the project location, application, drawings, geotechnical information and specifications. If the fabric is already specified, include the exact requirement and any substitution restrictions.

02 / Review the Requirements

Work with RHM to identify the intended function, compare relevant properties and gather technical documentation. Proposed substitutions remain subject to project approval.

03 / Coordinate the Work

Confirm quantities, roll sizes, installation details, availability and delivery requirements. Discuss overlaps or seams, aggregate placement and material handling before installation begins.

Before You Specify or Order

Common Geotextile Questions

How do I choose between woven and nonwoven fabric?

Start with the required function, soil conditions and design criteria. Both categories include fabrics with different strengths and hydraulic properties. RHM can help compare options against the project requirements.

Can I select a geotextile by weight alone?

No. Fabric weight does not establish soil-retention compatibility, flow capacity, tensile behavior or installation survivability. Compare the properties required by the specification and the application.

Is a geotextile the same as a geogrid?

No. A geotextile is a fabric; a geogrid has an open grid structure. They perform different functions and may be used together. One should not replace the other without an application review and any required design approval.

Can you help with FDOT or other agency specifications?

Share the current specification section and project requirements. RHM can help identify candidate materials and assemble supporting documentation for review. Suitability and acceptance must be checked for the specific application and current requirements.

How much overlap or cover is required?

There is no single detail for every installation. Overlaps, seams, cover thickness and placement methods depend on the soil, loading, selected material and project documents. Follow the approved details and applicable manufacturer guidance.

What do you need to prepare a quote?

Send the project name and location, application, specification or requested fabric type, estimated area or roll quantity, required delivery date and site-access details. Include plans or details that affect overlaps, seams or waste allowances.

Can you help if the plans still reference TenCate?

Yes. Send the original designation and specification. RHM can help locate current manufacturer documentation and compare the proposed material with the stated requirements.

Put the Project in Motion

Get a Geotextile Recommendation or Quote

Have a specification ready to price, or need help identifying the right fabric? Share your plans and site conditions with RHM.

Send What You Have

Include the project location, intended application, specification, estimated quantity and delivery timing. Drawings, soil information and site photos help explain the conditions.

Know the Next Step

RHM will review the information, clarify missing requirements and help establish the next step toward material selection, technical documentation or pricing.