FloGard® | Stormwater Inlet Filtration & Debris Capture

Capture Pollutants.
Protect What’s Downstream.

Trash and debris entering a drainage system become a downstream maintenance problem. R.H. Moore helps Florida project teams evaluate FloGard inlet filters and related debris-capture options, with attention to fit, drainage capacity and service access.

Start Where Runoff Enters

Put Capture Where Crews Can Reach It

FloGard’s inlet-filter approach intercepts pollutants at catch basins before runoff continues downstream. Review the drainage connection, expected pollutant loading and maintenance responsibilities together.

Engineers & Specifiers

Identify treatment objectives, inlet geometry and the hydraulic requirements the proposed device must satisfy.

Contractors & Site Teams

Document existing dimensions and installation access. Resolve conflicts with the frame, grate, pipes and other components before ordering.

Owners & Municipalities

Assign inspection and cleaning responsibility from the start. Plan how crews will reach and service each capture location.

Choose the Capture Location

Inlet Filtration or Outfall Debris Capture?

FloGard +Plus®

A catch basin insert using a fabric basket for solids capture and sorbent pouches for petroleum hydrocarbons. Explore inlet filters →

NetTech™ Gross Pollutant Trap

An outfall-mounted net system for trash and debris, included in Oldcastle’s FloGard brand overview. Explore outfall capture →

These approaches serve different locations and pollutant objectives. Evaluate the proposed configuration rather than treating all FloGard-family devices as interchangeable.

01 / Capture at the Inlet

FloGard +Plus® Catch Basin Insert Filters

FloGard +Plus uses a suspended filter basket beneath the grate. The manufacturer describes a shallow-profile insert with a high-flow bypass and replaceable sorbent pouches for petroleum hydrocarbons.

Physical Capture

The fabric basket collects gross solids, trash and debris. Confirm the selected basket and supporting pollutant information against the project’s objectives.

Hydrocarbon Sorption

Sorbent pouches provide the hydrocarbon-capture component. Include replacement materials and access in the maintenance scope.

Inlet Fit

Flat-grated and combination inlet arrangements are described. Frame dimensions and internal clearance determine the appropriate configuration.

Review the Manufacturer’s Standard Insert →

Measure Before Ordering

Match the Device to the Actual Structure

Oldcastle’s product lineup includes standard, combination, curb and round inlet filters, along with wall-mount and shallow-profile options. It also lists trench-drain, downspout and temporary filters. Ask RHM to confirm the configuration for the proposed use.

Record the Geometry

Provide clear opening, frame and grate dimensions, available depth and photographs. Use the manufacturer measurement sheet that matches the inlet type.

Identify Obstructions

Show pipe openings, steps, supports and existing equipment. Confirm that the proposed insert can be installed and removed for service.

Clarify the Use

Identify whether the installation is permanent or temporary and which pollutants it is intended to intercept. Request the corresponding product data.

Combination Inlet Measurement Chart (PDF) →

Separate Treatment From Conveyance

Review Filtered Flow & Bypass Capacity

The manufacturer’s specifier chart separates filtered flow, total bypass capacity and solids storage. Its standard-depth and shallow-depth examples have different storage and filtered-flow values.

Treatment Objective

Establish the flow that needs treatment and request the data for the selected model. A bypass rating is not a filtered-flow rating.

Drainage Performance

Have the project engineer assess inlet capture, bypass routing and downstream conditions using the applicable device details.

Storage & Service

Compare solids storage with expected loading and the planned cleaning frequency. Available space and maintenance needs both influence selection.

FloGard Specifier Chart (PDF) →

02 / Capture at the Outfall

NetTech™ Gross Pollutant Trap

NetTech combines a stainless-steel outfall extension with a net to intercept trash and debris. Oldcastle describes custom sizing for individual outlets and new or retrofit applications.

Release & Retention

When filled, the net is designed to release from the pipe connection, cinch closed and remain on a short tether so the pipe can continue discharging.

Site Layout

Provide outfall dimensions, geometry, tailwater information and the downstream area available for the tethered net. Coordinate the arrangement with the design team.

Retrieval & Service

Plan how crews will access, retrieve, empty or replace the net. Include equipment access and responsible personnel in the scope.

Review NetTech at Oldcastle →

Keep the System Serviceable

Make Maintenance Part of Selection

Oldcastle describes cleaning the FloGard +Plus basket by hand or vacuum truck and replacing the sorbent pouches. Frequency depends on site conditions and system performance.

Set the Inspection Plan

Assign responsibility, inspection intervals and any post-storm checks appropriate to the site. Use the current service instructions for the supplied model.

Provide Working Access

Confirm safe grate removal, work-zone needs and space for the intended cleaning equipment before finalizing the installation.

Document the Work

Record debris loading, cleaning and component replacement. Use observations to refine the service schedule and arrange disposal under the project’s requirements.

From Site Information to Pricing

Bring RHM Into the Review

01 / Share the Site

Send the Florida location, inlet or outlet schedule, photographs, dimensions and available drainage plans.

02 / Review the Configuration

Work with RHM to organize product information and questions for the manufacturer and project engineer.

03 / Confirm the Scope

Finalize model, quantities, required documents, delivery timing and maintenance components for pricing.

Before You Specify

FloGard FAQs

Is FloGard a hydrodynamic separator?

The +Plus device described here is an inlet filter using a basket and sorbent pouches. NetTech is a separate net-based outfall device. Select the treatment approach for the actual pollutant objective.

Can it fit an existing inlet?

Retrofit suitability depends on the specific structure and device. Provide dimensions, photographs and internal clearances for review before ordering.

Does the high-flow bypass treat all incoming runoff?

Do not equate bypass capacity with filtration capacity. Review the manufacturer’s separate flow values and the project’s required treatment and drainage criteria.

Does NetTech provide the same filtration as +Plus?

No. NetTech is described as a trash-and-debris capture device at the outfall. Do not transfer basket filtration or sorbent-pouch claims to the net system.

Does the device satisfy every Florida water-quality requirement?

Acceptance depends on the proposed device, application and reviewing authority. Have the design professional confirm the documentation needed for the project.

What does RHM need for a quote?

Send location, quantities, structure type and dimensions, plans, pollutant objectives, required submittals and delivery schedule.

Technical Resources

Get the Details for Your Configuration

Bring Us the Inlet or Outfall

Discuss FloGard With R.H. Moore

Share the drainage conditions and the pollutants you need to address. RHM can help coordinate configuration review, manufacturer documentation and pricing for the selected scope.