Applied Polymer Systems Silt Stop® Polyacrylamides
APS 600 Series Emulsion and APS 700 Series Powder
APS 600 and 700 Series Silt Stop® products are soil-specific anionic polyacrylamide copolymers used to help control erosion and prevent fine soil particles and colloidal clays from entering stormwater and receiving waters.
The APS 600 Series is supplied as an emulsion for application through hydroseeders, water trucks and other compatible spraying equipment. The APS 700 Series is supplied as a powder that can be applied through compatible spraying equipment or, where appropriate, by hand spreading or placement in ditches.
Product selection and application rates must be based on project-specific soil testing. Polyacrylamide products should not be selected or applied without confirming compatibility with the soil, water and intended application.
Product Information
- Helps prevent fine soil particles and colloidal clays from entering stormwater
- Helps remove suspended and solubilized soil particles and clay from water
- Helps prevent colloidal suspensions when applied to compatible soils
- Reduces soil movement during rain events on appropriate moderate slopes
- Helps bind certain cationic metals within the soil matrix, reducing solubilization
- Can reduce pesticide and fertilizer loss during rain events
- Helps reduce wind-borne dust
- Can improve soil permeability and water penetration
- May reduce operational and cleanup costs
- Helps reduce environmental risk and support regulatory compliance
- Mine tailings and waste piles
- Newly cleared construction and building sites
- Road and highway construction
- Temporary erosion control
- Construction stormwater management
- Hydroseeding applications
- Water-truck applications
- Dust-control applications
- Hand spreading and ditch placement using APS 700 Series Silt Stop® Powder
APS 600 Series Silt Stop® Emulsion
A soil-specific anionic polyacrylamide copolymer supplied as a liquid emulsion. It is designed for application through hydroseeders, water trucks and other compatible spraying equipment with appropriate mixing or recirculation capabilities.
APS 700 Series Silt Stop® Powder
A soil-specific anionic polyacrylamide copolymer supplied as a granular powder. Depending on the application and soil-specific recommendations, it may be applied through compatible spraying equipment, by hand spreading or through appropriate ditch-placement methods.
Soil-Specific Testing Is Required
Silt Stop® products are formulated for specific soil conditions. The appropriate polymer formulation and application rate must be determined through soil-specific testing before use.
Generalized application rates should not replace project-specific test results. Using an incompatible polymer formulation or an incorrect application rate can reduce performance and increase the potential for polymer or sediment to enter surface waters.
- Test representative soil and, when applicable, water samples before product selection.
- Use the formulation and application rate identified through testing.
- Follow the current manufacturer instructions for mixing, application, cleanup and storage.
- Confirm that the proposed application complies with project specifications and applicable regulatory requirements.
- Use appropriate personal protective equipment and promptly clean up spills because wet polyacrylamide can create extremely slippery conditions.
Contact R.H. Moore for assistance coordinating product selection and project-specific testing.
Available Products
- APS 600 Series Silt Stop® Emulsion
- APS 700 Series Silt Stop® Powder
Common Uses
- Construction-site erosion control
- Stormwater sediment reduction
- Hydroseeding
- Soil stabilization
- Dust control
- Ditch and slope applications
Important Qualification
Silt Stop® products are soil-specific. Product formulation and application rates must be confirmed through representative soil testing before use.
Need Help Selecting a Polymer?
R.H. Moore can help coordinate soil testing, product selection and application guidance based on the conditions and performance objectives of your project.


